Coffee Dry Mill Processing Machinery

Product Details:

Salient Features:

• Finest hulling results even with high percentage of small cherries.
• Easy to adjust, quadruple use by inversion of two-piece hulling drum, mistake-proof fitting, made of low-abrasion sheet steel with special perforations and in­dentations and individual drive for each component thus avoiding interference machine delivered completely wired thus facilitating machine,
• Our range of Cross Beat Coffee Huller machines are robust, well engineered, compact, user friendly and versatile, therefore this can handle a variety of materials.
• Dynamically balanced Blower assembly, an oscillating screen for greater separation in efficiency and accuracy in the coffee processing line.
• A sturdy, all-steel construction with sealed, life-time lubricated ball-bearings.
• The few susceptible parts to wear can be replaced easily without dismantling the machine and are available at reasonable prices. Normally, the machine is fed by a cup-and-belt elevator selected from our range of models. However, if silo feeding is preferred then a dosing and feeding screw conveyor may be supplied on demand.
• Swing down doors allows quick and easy access to the hulling cylinders for cleaning or replacement of blades and perforated screen.
• Individual motors attached to the Huller, Blower and Oscillating screen ensures constant speeds resulting in optimal and smooth, also trouble free performance.
• Higher output with lower power consumption. Four side’s reversible wear resistant hulling blades provided.
• The user friendly features of these machines enables easy adjustments of process parameters.
• An operating manual will be provided with the machine that contains valuable operational and maintenance tips which will help for trouble free operation of the machine and easy to place the spares order.

Technical Specifications:

Product Details:

Marshall – Fowler takes great pleasure in introducing “Catador – Pneumatic Green Coffee Separator”

which is specially designed for small coffee growers of the coffee world. Our Design, Research & Development team has taken special care while designing the Pneumatic Green Coffee Separator to use for the pneumatic separation of Green Coffee Beans according to specific gravity.

Principle & Design factors:

• MFG - Pneumatic Green Coffee Separator‘s are used for fine separation of heavy beans from light beans and Coffee
• Husk.
• They also separate coffee dust, shells, immature beans, stones and extraneous matter from dry coffee
• through suitable adjustments in operating speeds and air quantities.

Salient Features:

• Pneumatic Green Coffee Separators are particularly suitable for removing beans, which have been attacked by insects, or discoloured
• beans, which are generally lighter than fully matured beans.
• By nature of their Closed Circuit Pneumatic Green Coffee Separator ensure a dust free operation and help in preserving a clean
• factory environment.
• Pneumatic Green Coffee Separator are used after hullers in the case of dry cherry coffee and after peeler polishers in the case of
• parchment coffee for removal of husk and light coffee.
• They are also used after grading, to remove triage and light beans. The coffee is fed into an air current
• where separation is carried out by density differences and the light matter is carried up and exited via the
• lights outlet. The heavy beans fall on a wire screen and exit through the front of the machine.
• The Machine is equipped with an electric motor platform and a shaft extension to suit Electric Motor Drive.
• The recommended capacity is 1000 - 1200 kgs /Hr with operating speeds varying for separation of stones,
• separation of Green coffee triage and separation of dust / chaff.

Technical Specifications:

Product Details:

Owing to our years of experience and in-depth knowledge of this domain, we are offering a qualitative range of No.0 Type Coffee Huller Machinery. The machine is used in hopping out unwanted impurities and is precisely constructed to give quality outputs. This hulling machine consists of a cylinder fitted with feeding and hulling ribs enclosed in a strong casing, the lower portion of which is perforated to allow the husk to pass in to the husk chamber. Basically the process of hulling is effected means of the triangulating action between the hulling blade and the ribs on the cylinder.

Technical specifications:

• Dispatched in a fully assembled condition
• Mount fan pulleys/ main pulleys and fix the "V" Belts/Link belts
• Screens to be checked for their correct grease
• Direction of rotation of motor, machine and fan needs to be checked

Product Details:

• The machine produces green coffee without bean breakage and with uniform degree of polishing.
• No necessity for huller operation prior to polishing. Single machine can be used for both peeling and polishing.
• Degree of polishing can be easily adjusted by using counter weights supplied with the machine.
• Recommended moisture level of the input parchment for the optimum utilization of the machine is between 10.50 to 11.00%.
• The Peeler Polisher is provided with independent drives for the Hulling Shaft and the Aspiration Blower.
• Easy tilt down of lower section for cleaning purposes. Higher output with lower power consumption. These graders are suitable for Arabica & Robusta.
• A sturdy, all-Cast Iron construction with sealed, life-time lubricated ball-bearings.
• The user friendly features of these machines enables easy adjustments of process parameters.
• An operating manual will be provided with the machine that contains valuable operational and maintenance tips which will help for trouble free operation of the machine and easy to place the spares order.

Technical Specifications:

Product Details:

Marshall – Fowler takes great pleasure in introducing its wide range of Bucket Elevators which is suitable for transporting of Coffee in Dry Mill Plant where it performs elevating in between processing machineries. Marshall – Fowler Bucket Elevators are designed and built for gentle handling of materials with long life service and rugged duty. Elevators designed in such a way that their height’s can either be increased (or) decreased at any stage according to requirements of changes in site conditions/ according to other feeding point of the machinery where as the basic height starts from 4.0 Meter’s.

Additional Information:

• Item Code: ELEVATOR

Product Details:

• The Gravity Table can handle a variety of materials in different sizes very economically and can save processing time. (Input moisture should be <10.50 – 11.00 %).
• Our range of Gravity Table machines are robust, well engineered, compact, user friendly and versatile, therefore this can handle a variety of materials.
• Dynamically balanced all Blowers assembly, a rectangular deck for greater separation in efficiency and accuracy in the coffee processing line.
• High performance being proofed in the task of light particles separations & same weight of the stones.
• Fine & light particles are separated by a cyclone with aspiration system and the over flow can be passed through a bag filter so that recovery of ground material is maximised and air pollution will be avoided. (CUSTOMER’s OPTION)

Technical Specifications:

Product Details:

Owing to our years of experience and in-depth knowledge of this domain, we are offering a qualitative range of Silo Machinery. The machine is used in hopping out unwanted impurities and is precisely constructed to give quality outputs. This hulling machine consists of a cylinder fitted with feeding and hulling ribs enclosed in a strong casing, the lower portion of which is perforated to allow the husk to pass in to the husk chamber. Basically the process of hulling is effected means of the triangulating action between the hulling blade and the ribs on the cylinder.

Product Details:

• Large sized perforation sheets in any wanted size with close tolerances which can be served as oblong hole or perforations according to the customer standard. The cleaning of the screens will be ensured automatically as the massive rubber balls provided underneath every screen.
• Adjustable screen inclination is provided. The angle of throw and stroke are also adjustable.
• A wide variety of round holes and slotted screens of any size are available as per requirement.
• The length of each deck section is determined according to the type of coffee being processed and the amount of each grade present in the input.
• The machine is very versatile as grades can be kept separate or certain grades can be mixed together. They can be bagged off directly or go on to silos waiting to be bagged, and weighed or blended for roasting.
• Higher output with lower power consumption. These graders are suitable for Arabica & Robusta.
• A sturdy, all-steel construction with sealed, life-time lubricated ball-bearings.
• The user friendly features of these machines enables easy adjustments of process parameters.
• An operating manual will be provided with the machine that contains valuable operational and maintenance tips which will help for trouble free operation of the machine and easy to place the spares order.

Technical Specifications:

Additional Information:

• Item Code: GRADER

Product Details:

Salient Features:

• The Dry De stoner can handle a variety of materials in different sizes very economically and can save processing time. (Input moisture should be <10.50 – 11.00 %).
• Our range of De stoner machines are robust, well engineered, compact, user friendly and versatile, therefore this can handle a variety of materials.
• Dynamically balanced Vibro Motors & Blower assembly, Front side tested special springs suspensions are used for better result. High quality rubber bush suspension being used in Back side.
• High performance being proofed in the task of removing stone & foreign particles.
• Fine & light particles are separated by a cyclone and the over flow can be passed through a bag filter so that recovery of ground material is maximised and air pollution will be avoided.
• The user friendly features of these machines enables easy adjustments of process parameters.
• The construction of the machine is very rigid, vibration free, longer life and ensures low maintenance & less power consumption.

Technical Specifications:

Additional Information:

• Item Code: DESTONER

Product Details:

Owing to our years of experience and in-depth knowledge of this domain, we are offering a qualitative range of Cross Beat Huller . The machine is used in hopping out unwanted impurities and is precisely constructed to give quality outputs. This hulling machine consists of a cylinder fitted with feeding and hulling ribs enclosed in a strong casing, the lower portion of which is perforated to allow the husk to pass in to the husk chamber. Basically the process of hulling is effected means of the triangulating action between the hulling blade and the ribs on the cylinder.

Technical specifications:

• Dispatched in a fully assembled condition
• Mount fan pulleys/ main pulleys and fix the "V" Belts/Link belts
• Screens to be checked for their correct grease
• Direction of rotation of motor, machine and fan needs to be checked

Product Details:

Product Details: